1
/
of
3
CNC X WRIGHT
Everlast Plasma Cutter 62I CNC Ready
Everlast Plasma Cutter 62I CNC Ready
Regular price
$1,495.00
Regular price
Sale price
$1,495.00
Unit price
/
per
Couldn't load pickup availability
This unit comes with all the basics to get started with your Plasma table, including CNC port, and CNC torch. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table. The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3/8" regular cuts, maximum clean cut capability is up to 3/4" (at reduced speeds). Pierce up to 5/16" for production cutting. The new PTM-60 CNC torch is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
Features & Benefits:
- Comes with CNC torch (Hand torch not included)
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial class, 60% Duty cycle at 60 amps for CNC use
- Clean, smooth cuts with the genuine iPTM 60 CNC torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Front air pressure gauge allows quick verification of air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- Adjustable postflow timer for maximum consumable life
- IGBT components improve reliability and performance while reducing overall weight
- CNC socket for CNC use on plasma tables with included machine torch
- Suitable for use with 11,000 W "clean power" generators.
Tech Specs :
- Type: IGBT
- Voltage/phase: 220/240 V 1 Phase
- Output Amp/Volt Range: 20-60A; 88-104V
- OCV: 240V
- Max Inrush ( I1MAX ) Amps: 41A
- Maximum Rated (I1EFF ) Input Amps: 32.4A
- Duty Cycle At Rated Amps/Volts: 60% @ 60A/104V / 100% @ 50A/100V
- Arc Start Type: Blow Back (Piston type)
- PilotArc: Yes
- Torch Type: Italian designed iPT 60 CNC machine torch
- CNC Interface Port: Yes
- Adjustable Post Flow Timer: Yes
- Gouging: Light to Medium
- Recommended Cutting Air Pressure: 75 psi
- Recommended Compressor Capacity: 6CFM @ 90 psi/ 30 gallon tank
- OK-to-Cut Indicator/Low Air pressure safety: Yes
Minimum/Maximum:
- Up to 3/8" daily use with CNC (rated for best speed and quality)
- Up to 3/4" clean cut with CNC (edge start)
- Up to 1" severance @ 3-5 ipm
- Pierce up to 5/16" (Recommended to use an edge start for thicknesses 3/8" and above)
Plasma CNC capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure, etc. Capacity is reduced when cutting CNC due to several factors, including duty cycle, starting cut, higher cutting speeds demanded etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speeed.
Share
